HOW TO USE:
If testing from the day your period is due, you can test any time of the day. If testing early, use the first urine of the day.
Open the protective foil pouch immediately before use.
Remove test stick from foil package. Take off cap.
Hold test stick by thumb grip. Hold the Absorbent Tip pointing downwards in the urine stream for 5 seconds ONLY.
IMPORTANT: Too much or too little urine on the Absorbent Tip may invalidate the result (see How to Read Results section below). Or, if you prefer, collect a sample of your urine in a clean, dry container and dip all of the Absorbent Tip into the container for 20 seconds.
Replace the cap and lay on a flat surface or pointing downwards with the Result Window facing up.
HOW TO READ RESULTS:
You can read your result after 2 minutes. A blue line will appear in the Control Window indicating the test has worked. A ‘-’ in the result window indicates a ‘Not Pregnant’ result. A ‘+’ in the Result Window indicates a ‘Pregnant’ result.
DO NOT read your result after 10 minutes.
If after 10 minutes NO line appears in the Control Window, the test has not worked.
A blue line in the Control Window AND a ‘+’ in the Result Window. (it does not matter if one of the lines which make up the ‘+’ symbol is lighter or darker than the other ; the result is ‘pregnant)
The appearance of the ‘+’ symbol in the Result Window may vary, however, the lines that make up the ‘+’ symbol and the line in the Control Window should be of similar width as shown.
A blue line in the Control Window AND a ‘-’ in the Result Window.
TEST HAS NOT WORKED
No line appears in the Control Window